There are many possibilities for the surface design of wedding rings. Here we show you the most important ones. From the simple polished to the eye-catching surface decor.
Polished
VARIANT 01
We can polish your rings inside and out. With polished surfaces, the color of the material comes out a little more subtle, as it also reflects the color of the surroundings. The sensitivity of the surface is in the medium range. Small signs of wear are not noticed so quickly, but the polish is still not forever, if it is worn regularly, the polish wears off and the ring later looks a bit "greasy".
Sanded matt
VARIANT 02
We can provide your rings with a straight cut on the outside and inside. The matt sanded looks nice and modern and the colors of the materials come out very nicely.
Ice matt
VARIANT 03
Eismatt is a beautifully rustic and insensitive surface design. The ice mat goes in the direction of signs of wear, which the rings also get from wearing. The color of the materials comes out very nicely with eismatt.
Sanded diagonally matt
VARIANT 04
The diagonal matt finish is a somewhat unusual type of surface design. The color of the materials comes out well. The surface is quite sensitive to scratches. I am of the opinion that you should look for the surface that you like best and live with the subsequent development of the surface (signs of use). The traces of use will later make your own ring.
Forged by rail
VARIANT 05
Forged with the web is a rustic possibility to design the surface. Signs of wear are not noticed so quickly here. We can adjust the size of the surfaces by choosing the hammer and the strength of the blow. So here we can go even further into the wishes of the customer.
Forged with the fin
VARIANT 06
Forged with the fin is an insensitive surface design that still looks very natural, it reminds me of a tree bark. We can bring the oblong impacts into the surface either diagonally or at right angles.
Roughly filed
VARIANT 07
Roughly filed is a beautiful rustic and almost vintage graceful surface design, the colors of the materials come out nicely.
Bubbles
VARIANT 08
Bubbles is a rough rock surface design. We can only make the surface for rings that are made in the lost wax process and here we need minimum material thicknesses and widths to be able to represent this. Aslo the rings should be at least 2mm thick and 4mm wide. This design works best on beautifully wide (from 5mm) rings.
Sandblasted
VARIANT 09
Sandblasted is a very fine and very sensitive surface.
Matted
VARIANT 10
Matt is an insensitive rustic surface.
molding
VARIANT 11
Casting is a rustic surface.
Flat laser engraving
VARIANT 12
With the two-dimensional laser engraving, many different things can be represented on the surface.
Honed right angle
VARIANT 13
Grinded at a right angle.
Filed to a point
VARIANT 14
Sharpened to a point with a file.
Hallmarked
VARIANT 15
Hallmarked.
Flat laser engraving
VARIANT 16
With the two-dimensional laser engraving, many different things can be represented on the surface.